Please call for information and prices:
(07) 4096 3047
or email
us
|
|
CTEK 12 Volt Battery Chargers
CTEK - The World’s Smartest Battery Chargers
Any CTEK charger is capable
of charging all battery types. These include Wet/Flooded,
Maintenance Free, Calcium-Calcium,
Gel, Absorbed Glass Mat (AGM).
As well as charging your battery, all CTEK chargers have
“pulse” maintenance mode. Leave them connected
to batteries of stored vehicles for months and they will
safely hold the charge level to extend battery life and
eliminate starting problems next time you want to take
your “toy” for a run. CTEK’s Smart charge
will not damage vehicle electronics means you can charge
without the need to disconnect the battery from the vehicle.
How green do you want to be ? Not only do
you save dollars with CTEK, you are saving the planet.
Every unserviceable battery you dispose of contributes
to pollution of the environment. Reduce this waste by
extending your battery’s service life with CTEK.
12
Volt CTEK Battery Chargers
Input voltage sensor means all CTEK chargers,
by automatically adjusting their output voltage,
can charge drained and desulphated batteries even
if the mains voltage drops as low as 170 volts.
Strong, robust, water-resistant housing means
CTEK chargers can be safely used outdoors.
All CTEK chargers are supplied with a dedicated
charger socket which can be connected to the battery
and mounted on the machine to give convenient
connection point for the charger. The sockets
can be purchased separately if needed if you have
a number of machines.
All CTEK models will detect voltage of a battery.
Leave them connected 24/7 for months. They charge
the battery to full voltage then automatically
cut off at that point. Maintenance mode resumes
as required when charge level drops back.
CTEK backs its products with a 5 year guarantee.
Please read the instruction manual supplied with
the charger before connecting it to the vehicle.
Visit www.ctek.com
to download manuals and extensive information
on CTEK chargers and batteries.
|
CTEK Multi XS 12V 4A battery charger
Price: $140.00
Specifications:
Model: MULTI XS 4003
Input voltage: AC 220-240VAC, 50-60Hz
Output voltage: Nominal: 12V
Efficiency: 85%
Charging voltage 14.4V/0.8A, 14.4V/4A, 14.7V/4A
Charging current: 4A
Back current drain:* <1Ah / per month
Ripple: **240mV, 16mA
Ambient temperature: -20 degrees C to +50 degrees
C, output power is reduced automatically at higher
temperatures.
Type of charger: 8 step, fully automatic switch
mode with pulse maintenance.
Type of batteries: 12V lead-acid batteries (Wet,
MF, AGM, Calcium/Calcium and GEL)
Battery capacity: 1.2 -140Ah
Dimensions (L x W x H): 168x65x38mm
Insulation: IP65 (splash and dust proof), outdoor
use
Weight: 0.6kg
IP65 & 5 Year Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS
|
CTEK Multi XS 12V 7A battery charger
Price: $265.00
Specifications:
Model: MULTI XS 7000
Input voltage AC: 170—260VAC, 50—60Hz
Output voltage: Nominal: 12V
Efficiency: 85%
Charging voltage 14.4V, 14.7V, 13.6V/Supply, 6V/Recond
Charging current: 7A max
Back current drain:* <2Ah per month
Ripple:** 4%
Ambient temperature: -20°C to +50°C, output
power is reduced automatically at higher temperatures
Type of charger: 8 step, fully automatic switch
mode with pulse maintenance
Type of batteries: 12V lead-acid batteries (Wet,
MF, AGM, GEL and Ca)
Battery capacity: 14—150Ah (charging) 14—225Ah
(maintenance)
Dimensions (L x W x H): 191x89x48mm
Insulation: IP65 (splash and dust proof), outdoor
use
Weight: 0.8kg
IP65 & 5 Year Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS |
CTEK Multi XS 12V 15A battery
charger
Price: $390.00
Specifications:
Model: MULTI XS 15000
Input voltage AC 220-240VAC, 50-60Hz
Output voltage Nominal : 12V
Efficiency 85%
Charging voltage 14.4V, Temperature compensated
Charging current 15A max
Back current drain * <2Ah per month
Ripple ** <4%
Ambient temperature -20°C to +50°C, output
power is reduced automatically at higher temperatures.
Cooling Fan
Type of charger Eight step, fully automatic, switch
mode with pulse maintenance.
Type of batteries All types of 12V lead-acid batteries
(Wet, MF, AGM, Calcium/Calcium and GEL).
Battery capacity 28-300Ah (up to 500Ah maintenance)
Dimensions (L x W x H) 235x130x65mm
Insulation IP 44 (Outdoor use) ***
Weight 1.4kg
IP44 & 2 Year Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS |
CTEK Multi XS 12V 25A battery
charger
Price: $535.00
Specifications:
Model: MULTI XS 25000
Input voltage AC 220-240VAC, 50-60Hz
Output voltage Nominal: 12V
Efficiency 85%
Charging voltage 14.4V, Temperature compensated
Charging current 25A max
Back current drain* <2Ah per month
Ripple** <4%
Ambient temperature -20°C to +50°C, output
power is reduced automatically at higher temperatures.
Cooling Fan
Type of charger Eight step, fully automatic, switch
mode with pulse maintenance.
Type of batteries All types of 12V lead-acid batteries
(Wet, MF, AGM, Calcium/Calcium and GEL).
Battery capacity 50-500Ah
Dimensions (L x W x H) 235x130x65mm
Insulation IP 44 (Outdoor use)***
Weight 1.4kg
IP44 & 2 Year Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS
|
*) Back current drain is what drains the battery if
the charger is connected without the power cord connected.
**) Ripple denotes the amount of interference there
is to the current and voltage. A high current ripple
heats the battery and shortens its life. A linear charger
has a current ripple of 70 - 400% which is much larger
than the maximum 5% for a modern sealed battery. Voltage
ripple could harm other equipment, which is connected
to the battery.
The MULTI XS 15000 delivers voltage and current with
very low ripple. The battery gains a long service life
and there is no risk of damage to other electronic devices
connected to the battery.
***) IP 44 cannot be guaranteed unless the charger
is positioned with its top or long side facing up.
Prices include freight
to nearest regional centre in Qld.
Freight cost to outlying areas is extra.
All prices are in Australian Dollars inclusive 10% GST.
All prices are subject to change and should be confirmed
before ordering.
Back to top of page
|
and
