| |
48 Volt Studer Inverter
Chargers
Inverter chargers combine
an inverter and a battery charger
in one complete unit. They can be used with a solar
PV array or wind turbine power system or when
another there is another AC power source available,
such as a diesel generator or utility power. They can
operate as uninterruptible power supplies (UPS). These
intelligent devices can behave either as an inverter
or a charger and can switch between one and other as
required. Inverter chargers can be connected to the
electricity grid, but they are not grid tied inverters.
Studer - Quality Swiss
made inverter chargers suitable for marine, vehicle,
remote area and backup power applications. The Studer
Compact Series consist of devices including
3 fully automatic functions : an inverter,
a
battery charger and a transfer
system. Simple to use, no complicated settings
to program.
The Studer Xtender Series provides
an extensive freedom of use due to its multi function
design. In a basic application, it offers the functions
of inverter, battery charger,
transfer system and assistance to the
source. These functions can be combined and controlled
in a totally automatic way for an exceptional comfort
and an optimal management of the energy available.
48V Studer XP Compact Inverter
Chargers
 The
Compact series benefit from our "one step
ahead" technology in the field of inverters.
THE COMPACT SERIES OFFER:
High and steady efficiency
Outstanding overload capability, thanks to the
combined use of a toroidal transformer and a
MOSpower stage
Ultra-fast regulation and a control by microprocessor
Eelectrical supply to any kind of appliance
Fast transfer relay
4 STAGE(I/U/Uo/equalizing) battery charger
with Power Factor Correction (PFC)
Complete internal protection of the Invertercharger
(overload, overheat, short-circuit, reverse polarity)
Stand-by level adjustable on a large range and
from a very low threshold on
No noise thanks to HF-switching > 20kHz
2 Years Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS |
Studer XP Compact 48V 1600W / 20A sine wave
inverter charger
Price: $2,970.00
Model: XPC2200-48
Output Power (continuous) @ 25°C: 1600Va
Peak Efficiency: 95%
Input Voltage Range: 38 to 64v
Low Battery Cutout: 43.2V
Battery charger Output Current: 0 to 20A
Bulk Charge Cycle Voltage: 57.6v
Equalisation Voltage: 62.4v
Dimensions (H x W x L): 124 x 215 x 410mm
Weight: 12.6kg
|
48V Studer Xtenda
Series Inverter Chargers
Programmable
auxiliary contacts allow the interconnection with
existing systems or the implementation of extended
functions. Fully programmable by means of its
remote control, it enables the update of the software,
thus making it an upgradeable product to which
new functions may be added further on. By the
implementation of several units, it is possible
to create a 3-phase source or to set them in parallel
to increase the power available. Up to 9 inverters
of the Xtender serie shall therefore be combined
together.
Parallel and 3 phase configuration up to 9 units
Outstanding efficiency and overload capabilities
Smart-Boost Function for assistance to the source
Automatic reduction of peak loads
Automatic allocation of the available power
Standby level adjustable from a very low load
threshold
Multi-stage, fully programmable battery charger
with PFC
Ultra fast high power transfer relay
Control by digital signal processor (DSP)
2 fully independently programmable auxiliary contacts
Real time clock for event record and auxiliary
relay programming
2 Years Warranty
DOWNLOAD
PRODUCT SPECIFICATIONS |
Studer Xtenda Mobile 48V 2000W with 30A charger
& t/fer relay
Price: $3,856.00
Output Power (continuous) @ 25°C: 2000Va
Peak Efficiency: 93%
No Load Current Draw On - Stand-by: 10 - 2W
Input Voltage Range: 38 to 68Vdc
Battery charger Output Current: 0 to 30A
Dimensions (H x W x L): 325 x 133 x46.6mm
Weight: 16.2kg |
Studer Xtenda Mobile 48V 3500W with 50A charger
& t/fer relay
Price: $4,857.00
Output Power (continuous) @ 25°C: 3500VA
Peak Efficiency: 96%
No Load Current Draw On - Stand-by: 14 - 2.1W
Input Voltage Range: 39 to 68Vdc
Battery charger Output Current: 0 to 50A
Dimensions (H x W x L): 325 x 133 x46.6mm
Weight: 22.9kg |
Studer Xtenda Mobile 48V 5000W with 100A charger
& smart boost
Price: $8,542.00
Output Power (continuous) @ 25°C: 5000VA
Peak Efficiency: 96%
No Load Current Draw On - Stand-by: 1.8W/2.2W/22W
Input Voltage Range: 150-265Vac / 50 to 140Vac
(-01)
Battery charger Output Current: 0 - 100A
Dimensions (H x W x L): 230x300x500mm
Weight: 42kg |
Studer Xtenda Mobile 48V 7000W with 120A
charger & smart boost
Price: $10,610.00
Output Power (continuous) @ 25°C: 7000VA
Peak Efficiency: 96%
No Load Current Draw On - Stand-by: 1.8W/2.4W/30W
Input Voltage Range: 150-265Vac / 50 to 140Vac
(-01)
Battery charger Output Current: 0 - 120A
Dimensions (H x W x L): 230x300x500mm
Weight: 46kg
|
Prices include freight
to nearest regional centre in Qld.
Freight cost to outlying areas is extra.
All prices are in Australian Dollars inclusive 10% GST.
All prices are subject to change and should be confirmed
before ordering.
|
and
